Klicka för att förstora

På lager

*** 1 Channel ***

The 2N® BRI Lite (GSM router) connected to a PBX ISDN port (BRI, So) transmits GSM services to ISDN user terminals. In addition to cost-efficient calls, it provides the following services: calling line identification presentation (CLIP), connection status displaying, advice of charging (AOC), SMS send/receive using the ISDN telephone set, and billing data recording.

DISA provides DDI from the GSM network. The ISDN BRI GSM Gateway (ISDN router) welcomes the calling party with a DISA message and receives the number in the DTMF mode. Then, it converts the number into the DDI (in the PTP configuration) or MSN (in the PTMP configuration) mode. The least-cost routing (LCR) service helps establish connection alternatively by analyzing the number (e.g. via the "netcall", etc.). The originally dialed number is completed as required by the Gateway program setup.

All called numbers, including connection date and time, are recorded in the 2N® BRI Lite GSM Gateway buffer. Outgoing calls are checked by the call barring table, which disables expensive calls.

2N development department has implemented an interesting feature for those who don't want to learn 2N's ISDN BRI GSM Gateway configuration - Dynamic Clip Routing on ISDN-BRI Gateways. This feature enables you to make configuration settings on your company PBX only without programming our 2N GSM Gateways.

With the latest version of SMS server software you can get the advantage of SMS delivery reports. Since now, you may have a full review of your messages, whether they were delivered and exactly when.

NEW FEATURES:

• 2N® Mobility Extension feature added!
  With the latest firmware you may use 2N® BRI LITE gateway as a 2N® Mobility Extension. Call transfer, remote possibility to disable/enable this feature (and separately also SMS at No Answer) for each user is a matter of course. Maximum number of users is 8, given by limits of Point To Multi point connection which provides 8 MSN numbers. For ME the
  2N® BRI LITE must be connected in TE Mode to the PBX and also a license must be requested from 2N.
  
  
• Follow me - makes you accessible any time and anywhere on a mobile phone.
  
  
• Intelligent Incoming Call Routing - enables to assign the extension number to be called to each calling number. Having detected the number, the GSM Gateway makes an automatic DDI according to the GSM Gateway (FCT) program table.
  
  

Get more information about recently developed product - 2N® BRI Enterprise GSM Gateway!

Features:

• 2N® Mobility Extension
• Efficient Least Cost Routing (LCR)
• CallBack
• Follow Me feature for up to 8 users
• High-quality voice transmission (EFR super sound)
• Intelligent routing of incoming calls based on history of outgoing calls
• DTMF dial-in with voice message
• SMS sending and receiving
• Call data records
• SMS message in case of a missed call
• PBX connection by digital BRI ISDN
• Routing by used B-channel
  
• Worldwide use (GSM 850/1900 MHz or 900/1800 MHz)

HW compatible with the ISDN 2N BRI Lite GSM Gateway

2N® BRI Lite is compatible with all telecommunication devices that work with the standard EURO ISDN BRI with DSS1 signaling.

Flash animated case studies:

Follow me

"Follow me" makes the user accessible any time and anywhere on the mobile phone

AutoRouting

The 2N® BRI Lite GSM Gateway automatically stores information about outgoing calls. If somebody calls back, he is automatically routed to the extension that the previous call was made from.

CallBack

When the CallBack function is activated, the GSM Gateway refuses to receive this incoming call (the call is only ringing) for a pre-defined time. In case the calling party terminates the call before the timeout, the GSM Gateway starts calling to a defined extension. When the extension picks the call up, the gateway starts calling to the GSM (called party number = CLIP of the incoming call).

CLIP PBX

CLIP (Calling Line Identification Presentation). the CLI can also be shown on phones connected via a PBX.

CLIR PBX

CLIR (Calling Line Identification Restriction). The CLI of the SIM card in the gateway can be hidden for outgoing calls.

Least Cost Routing

The LCR function is activated for each port used (Port Modes chart). All numbers starting with predefined prefixes are preferentially connected to these particular ports.

Routing

If the gateway finds a match between the incoming number and a number listed in the CLIP routing chart, it activates the connection to the PBX or telephones connected via the port listed in the same chart.

No answer SMS

In case an outgoing call from the GSM Gateway is not connected (only rings for a defined time period), the gateway sends an SMS to the same number with a predefined text message.

SMS server

2N® BRI Lite supports SMS sending and receiving. The
2N® SMS Server users can also send SMS among each other.